Android User Guide

Command Terminal

Connect the debug UART and boot Android to access the Android console.

Place media files on TF card, USB disk, or internal storage and open them with Android applications.

Enable Wi-Fi or Bluetooth in Android settings and connect to wireless networks or Bluetooth devices.

Connect a USB mouse or keyboard to a USB HOST port to operate Android.

Storage devices are usually mounted under /storage/.

Connect a supported camera and open the camera application for preview, photo capture, or recording.

Connect an Ethernet cable to the network port to access wired network.

HDMI output can mirror display and audio to an external monitor.

The board powers on after 12V input is connected. The power key can be used for shutdown, sleep, and wake-up depending on firmware behavior.