Linux QT Filesystem
This page reuses the previously prepared X3568 software documentation template. For ibox3568, actual source package names, image names, partition files, tool versions, and board-level configuration should follow the current ibox3568 SDK and release package.
This page summarizes iboibox3568 Linux / QT filesystem content, focusing on Buildroot compilation and the MIPI display configuration entry.
Buildroot Filesystem
The build.sh script in the iboibox3568 Linux SDK integrates the Buildroot rootfs build target:
./build.sh buildroot
To build U-Boot, Kernel, rootfs, and recovery completely, run:
./build.sh all
After the build, the rootfs image is released to the rockdev directory.
Package Firmware
./build.sh firmware
./build.sh updateimg
update.img is used for unified firmware upgrade through RKDevTool.
Configure a MIPI Display
Display configuration files are located at:
kernel/arch/arm64/boot/dts/rockchip
Example 7-inch MIPI display configuration file:
lcd-dsi0-mipi1024x600-WY070ML.dtsi
Select the required LCD module in kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi. For example, to use a 7-inch MIPI display:
//#include "lcd-dsi0-mipi1024x600-WY070ML.dtsi"
#include "lcd-dsi1-mipi1024x600-WY070ML.dtsi"
Actual projects should be checked together with the LCD interface hardware connection, backlight, touch, and device-tree configuration.